3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? mini d ribbon (mdr) cable assembly .050 high speed digital data transmission system, 26 position 1w226-tzlb-xxx-0lc physical electrical environmental *rohs = directive 2002/95/ec, restriction of the use of certai n hazardous substances in elec trical and electronic equipment "rohs compliant" means that the product or part does not contain any of the following substances in excess of the following max imum concentration values in any homogeneous material, unless the subst ance is in an application that is exempt under rohs: (a) 0.1% (by weight) for lead , mercury, hexavalent chromium, polybrominated biphenyls or polybromianted diphenyl ethers ; or (b) 0.01% (by weight) for cadmium. unless otherwise s tated by 3m in writing, this information represents 3m's knowledge and belief based upon information provided by third party suppliers to 3m. channel link is a trademark of national semiconductor. camera link is a certification mark of automated imaging association. connector contact plating wiping area: 30 ? [ 0.76 m ] min. gold shell color: beige shell material: acrylonitrile butadiene styrene (abs) cable color: beige cable jacket material: polyvinyl chloride (pvc) cable flammability: awm vw-1 voltage rating: 30 v current rating: 1 a insulation resistance: > 1 10 8 at @100 vdc withstanding voltage: 350 vrms for 1 minute individually shielded twisted pairs characteristic impedance: 100 10 conductor size: 28 awg stranded propogation velocity: 1.25 ns/ft [4.1 ns/m ] skew (within pair): 50 ps / meter maximum skew (channel skew per chipset ): 50 ps / meter maximum temperature rating: -20 c to +75 c ts-2106-03 sheet 1 of 3 ? supports lvds channel link ? signaling ? supports camera link? specification v1.0 ? 11 shielded pairs (100 ohm) +4 grounds for high bandwidth applications ? high density 26 position mdr with rugged ribbon type contact ? overmolded backshell ? thumbscrew latching options ? used for bulkhead connection, or rack io panel connection ? used to extend the length of a standard camera link? cable assembly ? rohs* compliant date modified: may 29, 2006 ul file no.: e86982
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 1234 567 1213 11 10 14 89 15 16 17 18 19 20 21 22 23 24 25 26 1234 567 1213 11 10 14 89 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 12 13 11 10 14 8 9 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 12 13 11 10 14 8 9 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 12 13 11 10 14 8 9 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 12 13 11 10 14 8 9 15 16 17 18 19 20 21 22 23 24 25 26 mdr 26 position receptacle one end 45.7 1.8 length 45.7 1.8 26 position high density mini d ribbon (mdr) male plug 26 position high density mini d ribbon (mdr) female receptacle cable (see pinout for cable construction) 2x thumbscrew #4-40 thread 2x jack socket #4-40 thread 39.4 1.6 39.4 1.6 14.5 0.6 14.5 0.6 mdr 26 position plug one end 31.27 1.23 over-molded #4-40 thumbscrew over-molded #4-40 jack socket 31.27 1.23 3m ? mini d ribbon (mdr) cable assembly .050 high speed digital data transmission system, 26 position 1w226-tzlb-xxx-0lc 1w226-tzlb-xxx-0lc ts-2106-03 sheet 2 of 3 ordering information note: 1. use 3341-31 jacksocket for mounting receptacle to panel . [inch] tolerance unless noted mm mm [ ] dimensions for reference only .10 .1 0.00 0.0 1234567 1213 11 10 14 89 15 16 17 18 19 20 21 22 23 24 25 26 1234567 1213 11 10 14 89 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 12 13 11 10 14 8 9 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 12 13 11 10 14 8 9 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 12 13 11 10 14 8 9 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 12 13 11 10 14 8 9 15 16 17 18 19 20 21 22 23 24 25 26 mdr 26 position plug mdr 26 position receptacle one end one end 39.4 1.6 39.4 1.6 14.5 0.6 14.5 0.6 mdr 26 position plug one end over-molded #4-40 thumbscrew 31.3 1.2 over-molded #4-40 thumbscrew over-molded #4-40 jack socket 31.3 1.2 assembly length tolerance cable length: 0.5 to 1.5 meters -0 + .05 meters 2 to 10 meters -0 +3% of length length: 050 = .5 meters 450 = 4.5 meters 100 = 1 meters 500 = 5 meters 200 = 2 meters 600 = 6 meters 250 = 2.5 meters 700 = 7 meters 300 = 2 meters 800 = 8 meters 350 = 3.5 meters 900 = 9 meters 400 = 4 meters a00 = 10 meters
3m interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? mini d ribbon (mdr) cable assembly .050 high speed digital data transmission system, 26 position 1w226-tzlb-xxx-0lc mdr 26 position pinout p1 p2 pair signal position pair signal position shld ishld 26 shld ishld 26 shld ishld 13 shld ishld 13 1 y0- 25 1 y0- 25 1 y0+ 12 1 y0+ 12 2 y1- 24 2 y1- 24 2 y1+ 11 2 y1+ 11 3 y2- 23 3 y2- 23 3 y2+ 10 3 y2+ 10 4 yelk- 22 4 yelk- 22 4yelk+ 9 4yelk+ 9 5 y3- 21 5 y3- 21 5y3+ 8 5y3+ 8 6 100ohm 20 6 100ohm 20 6term 7 6term 7 7 z0- 19 7 z0- 19 7z0+ 6 7z0+ 6 8 z1- 18 8 z1- 18 8z1+ 5 8z1+ 5 9 z2- 17 9 z2- 17 9z2+ 4 9z2+ 4 10 zelk- 16 10 zelk- 16 10zelk+3 10zelk+3 11 z3- 15 11 z3- 15 11z3+2 11z3+2 shld ishld 14 shld ishld 14 shld ishld 1 shld ishld 1 notes: 1. all pairs are individually shielded with aluminum foil. 2. pair shields are wrapped aluminum out and in contact with six internal drains (logic ground). 3. outer braid and foil (chassis ground) is isolated from inner drains (logic ground). ts-2106-03 sheet 3 of 3
3 printed in usa. minimum 10% post-consumer fiber important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. 3m electronics 6801 river place blvd. austin, tx 78726-9000 800/225-5373 www.3m.com/electronics ? 3 m 2 0 0 6
|
